You are here: Home / API / Hot APIs / Anthranilamide(88-68-6)C7H8N2O

Anthranilamide(88-68-6)C7H8N2O

  • Chemical Name: Anthranilamide
  • CAS No.: 88-68-6
  • MF: C7H8N2O
  • MW: 136.15
  • Purity:≥98% or according to customer requested
  • Color: Light brown to gray-brown
  • Product Categories: Pharmaceutical raw materials;pharma; Organic reagents
  • Test method: HPLC
Availability:
Basic Information        
 
Product Name: Anthranilamide
Synonyms: 2-AMINOBENZAMIDE; AMINOBENZAMIDE(2-); ANTHRANILIC ACID AMIDE; ANTHRANILAMIDE;2-AB, 2-Aminobenzamide;ORTHO-AMONOBENZAMIDE;ORTHO-AMINOBENZAMIDE;
CAS: 88-68-6                
MF: C7H8N2O
MW: 136.15
EINECS: 201-851-2
Product Categories: Pharmaceutical Intermediates; Organic reagents; Pharmaceuticals; 
      
Chemical structure        

Anthranilamide              

Chemical Properties        
       
Melting point  111-113 °C (lit.)
Boiling point  300 °C
density  1.1778 (rough estimate)
refractive index  1.5460 (estimate)
Fp  198 °C
storage temp.  Keep in dark place,Inert atmosphere,Room temperature
solubility  <5g/l
pka 15.77±0.50(Predicted)
form  Crystalline Powder or Flakes
color  Light brown to gray-brown
Water Solubility  Soluble in hot water and alcohol. Slightly soluble in ether and benzene. Very soluble in ethyl acetate.
Anthranilamide Uses           

Acetaldehyde Scavanger in PET

1. Anthranilamide is used as acetaldehyde scavenging agent in Polyethylene terepthalate (PET) blends.

2. PET Blends containing various concentration of Anthranilamide exhibit higher acetaldehyde scavenger ability, thereby  reduction in detectable acetaldeyde content.

3. As little as 100 PPM, by weight of Anthranilamide shown to reduce residual acetaldehyde detected in PET by 46%.

4. Addition of optimum scavenger (Anthranilamide) concentration had minimal effects on perform intrinsic viscosity and  color changes

5. Anthranilamide is present in the finished container at levels not to exceeds 500 mg/kg (PPM) in PET bottles used to hold water and at levels not to exceed 250 mg/kg (PPM) in PET bottles used for non-water, aqueous, acidic and low-alcohol food applications.

Intermediate of Dyes, Pharmaceuticals, Agrochemicals

It can be used as an intermediate for dyes, pharmaceuticals, agricultural chemicals, perfumes, pigments, flavors and organo luminophores

Resins

It can be used in the manufacture of anthranilate esters and ion exchange resins.

It can be used as a lacquer additive for food containers.

It can be used as a modifier to improve drying of alkyd resins.

Antioxidants

It can also be used as an antioxidant for greases, lube oils and unsaturated rubbers.


Technical Support & Resources

Information provided in the product description is from published literature. Due to the nature of scientific experimentation, your results (e.g., selectivity and effective concentrations) or specific application for this product may differ. If you have questions about how this product fits your application, please contact our technical support staff.

MSDS: MSDS available.

COA: COA can be available if you send us inquiry.

Email us at: info@maxmedchem.com for more details.

packagingpacking&shipping

LEAVE MESSAGE

Active Pharmaceutical Ingredients (APIs)& Pharma intermediates Supplier

MAPS

ABOUT US

Maxmedchem Corporation, was founded in 2004 and is the one of top manufacturers of Active Pharmaceutical Ingredients (APIs), and intermediates.

CONTACT US

Add : 1901 S.Lynx Place, Ontario, CA 91761
Phone : +16263716327
Copyright © 2021 MAXMEDCHEM Co. Ltd. All rights reserved. | Sitemap